 |
| DTSR 1000 - Digital Television Satellite
Receiver |
|
| Features |
-
DVB-S QSPK Receiver
-
Frequency Tuning in 1MHz steps
-
SNMP v1 Control (optional)
-
Ideal front end for MPEG-2
Decoder
-
Dual DVB-ASI Outputs
-
Low Cost
-
Firmware upgradeable in
service.
-
Compact 1 RU Construction
-
Reset/Status port provides
alarm monitoring via contact
closure
|
| Specifications |
Input:
|
RF Frequency |
Actual: 950-2150MHz
Low-band:10700-11900MHz
High-band:11550-12750MHz |
| Return loss: |
>8dB |
| Input Level per Channel: |
-65dBm to -25dBm @ 27.5 Mega Symbols/sec |
| Symbol Rate: |
1 to 45 Mega Symbols/sec |
| RF Input Impedance: |
75 Nominal |
| Outputs: |
MPEG-2 Transport Stream, 2 x DVB-ASI |
| Error Correction: |
Viterbi FEC, all DVB code rates - 1/2,
2/3, 3/4, 5/6, 7/8
Reed Solomon (204 byte mode) |
| ASI Packet Modes: |
Burst, Byte |
| ASI Packet length: |
188-byte, 204-byte |
| Control: |
Serial RS232
Optional SNMP v1 over Ethernet
Optional remote monitoring and control via HTML web page |
| Dimensions: |
483mm wide, 44mm high, 340mm deep |
| Weight: |
2.3Kgs. |
| Power: |
100 to 240 VAC, 50/60Hz, 20W nominal |
|
|
|
中文 
English