 |
| DTVD 3010 MPEG2 4:2:0 Video Decoder
|
The DTVD 3010 module for the Broadcast Technology 3000 Series
is a MPEG2 4:2:0 video decoder with ASI input and analogue composite
video and analogue audio output.
Occupying just one slot of the 14 available in the DTRS 3000 chassis,
it offers a compact, and cost effective solution where a Digital
transport stream needs to be decoded to baseband. As with the other
modules in the range, this unique, totally flexible building block
approach ensures the best possible use of space whilst maintaining
the highest standards that Broadcasters expect and Broadcast Technology
provides.

DTVD 3010 MPEG2 Video Decoder
|
| Features |
|
- 4:2:0 Video decoder
- Dual ASI input (D option) or loop though (L option)
- MPEG2 4:2:0 decoding
- Dual analogue video out
- Stereo audio out
- RS232 Serial control
- DARTnet control via rack system
- Compact 1 slot unit
- Hot swappable
- BISS de-scrambling - Modes 1 & E
- Compatible with redundant architecture
- Additional front panel monitoring output
- Front panel service selection
- DVB VBI insertion and H and V lock options
- Active system alarms and event log
|
| SPECIFICATIONS |
|
Input:
|
MPEG2 Transport Stream, DVB-ASI |
| Input return loss: |
> -15dB |
| Max I/P data rate: |
100Mbits/sec |
| Packet length : |
188-byte, 204-byte |
| Packet modes: |
Burst, Byte |
| Video decode: |
MP@ ML (4: 2: 0) up to 15Mbits/
s, (4. 2. 2) (up to 50Mbits/ s) |
| Audio decode: |
MPEG layer I and II 32 to 448kbits/s |
| Formats: |
Dolby AC-3 pass-through |
| Main card outputs: |
Composite video (PAL/NTSC)
Analogue audio (stereo pair)
SDI video (SMPTE259M) with embedded audio
Dual AES/EBU audio
ASI active loop through
General- purpose interface (GPI) signalling control |
| Control: |
Serial RS232
DARTnet control via rack system
SNMP MIB/ GUI via DTCC and DTVI |
| Power: |
8W |
|
| Typical Applications |
|
- DVB ASI MPEG2 video decoding
- Service acquisition and monitoring
- BISS Descrambler
|
| Ordering Information |
|
| DTVD 3010D |
Base decoder - Dual ASI input |
| DTVD 3010L |
Base decoder - ASI Loop through |
| DTVD 3010A |
Second Stereo Audio Decoder (analogue) |
| DTVD 3010B |
BISS Mode 1 and E descrambling |
| DTVD 3010R |
Reference Lock (H and V) input |
| DTVD 3010O |
On Screen Display |
| DTDV 3010V |
VBI Processing, WSS, AFD, Teletext, Subtitling |
|
|
|