Broadcast quality NN6-1161RFL Broadcast Quality L band DVB-T Terrestrial modulator with built-in RF Up Converter. RF outputs are filtered and agile within the L-band, covering the [1.4 GHz to 1.7 GHz], i.e. [1400 MHz to 1700 MHz]. Designed to provide signals for field test of Modeo mobile receiver application development and validation, and smart demonstrations.

Broadcast Quality, SNMP Manageable, Completely Frequency Agile, COFDM (DVB-T) and opt DVB -H MFN Modulator with DVB ASI input via USB-2 or ASI and IF and RF output only for Multi Frequency Network Applications. Field selectable 6, 7, or 8 Mhz channel bandwidths. Optional DVB H firmware. Part of complete test family including Encapsulator, MIP Inserter for comprehensive Broadcast Trials and Road Shows. Suitable RF profile for on air applications.

Standard Features:

• DVB-T Terrestrial Modulator with integrated RF up-converter (filtered agile outputs in the 1400 MHz to 1700 MHz L band)
• Broadcast quality

• USB 2.0 input option

• Embedded USB 2.0 to DVB-ASI converter with stream player application (Windows XP, Windows 2000)

• Applications: test and validation, development, broadcast
  Fields: tuner validation, Set top box testing, shows, R&D lab

• Supports hierarchical input mode as recommended by DVB-H

• High and Low priority MPEG-2 stream inputs

• Separated modulation schemes for each input

• Support both Frequency Network modes:
  MFN and SFN modes
  Seamless switching (SFN mode)
  External synchronization (10 MHz and 1 pps GPS) for SFN

• Supports 5, 6, 7 and 8 MHz bandwidth

• dynamically switchable on the fly (no need for cold reset)

• Enhanced ASI input stage - on each priority:

• Redundant ASI inputs ( 2x ASI inputs per priority, automatic switching)

• 188/204 bytes per packet accepted (burst/continuous)

• FEC processing and error correction

• PCR restamping

• TS bit rate adaptation

• Very low switching/setup time to run test batches on receivers

• High end processing of input MPEG TS before modulation:

• MIP processing (Megaframe Initialization Packet for DVB-T or DVB-H Single Frequency Networks) and external synchronization

• NIT automatic update

• TPS Signaling

• Static/dynamic delay insertion to adapt terrestrial networks

• 1x main RF output within L-band (1.4 GHz to 1.7 GHz)

• 1x monitoring RF output within L-band (1.4 GHz to 1.7 GHz)

• Optional Linear and non-linear Digital Precorrection

• Optional SNMP alarm trap sending

• Remote control

• 10/100bT ethernet interface

• Embedded TCP/IP server

• Control & Command client software

• Compact equipment

• Robust and Portable

• 19'' 1RU rack mountable

• Alarm management

Standard Features:

• DVB-T Terrestrial Modulator with integrated RF up-converter
• Optional firmware for DVB-H compliance to address mobile receivers
• Broadcast quality
• Supports hierarchical input mode

• High and Low priority MPEG-2 stream inputs

• Separated modulation schemes for each input

• Support MFN Frequency Network modes:

  1 ASI input and , 1 ASI loop through
  188/204 bytes per packet accepted (burst/continuous)

• FEC processing and error correction

• PCR restamping

• TS bit rate adaptation

• High end processing of input MPEG TS before modulation:

• Integrated freq agile RF up-converter

• 1x RF UHF output

• Embedded TCP/IP server

• Control & Command client software

• Compact equipment

• Robust and Portable

• 19'' 1RU rack mountable

• Alarm management

  
  

Applications:

• Test and validation, development
• Broadcast Fields: tuner validation, Set top box testing, shows, R&D lab

Broadcast Quality, SNMP Manageable, Frequency Agile COFDM (DVB-T) Modulator with DVB ASI input via USB-2 or ASI and IF and L band RF output for single and Multi Frequency Network Applications. Field selectable 6, 7, or 8 Mhz channel bandwidths. Optional DVB H firmware.

Standard Features:

• DVB-T Terrestrial Modulator with integrated L band 1.4 -1.7 GHz RF up-converter
• Optional firmware for DVB-H compliance to address mobile receivers
• Broadcast quality
• Supports hierarchical input mode
• High and Low priority MPEG-2 stream inputs

• Separated modulation schemes for each input

• Support both Frequency Network modes:
  - MFN and SFN modes
  - Seamless switching (SFN mode)
  - External synchronization (10 MHz and 1 pps GPS) for SFN

• Enhanced ASI input stage - on each priority:

• Redundant ASI inputs ( 2x ASI inputs per priority, automatic switching)

• 188/204 bytes per packet accepted (burst/continuous)

• FEC processing and error correction

• PCR restamping

• TS bit rate adaptation

• High end processing of input MPEG TS before modulation:

• MIP processing

• NIT automatic update

• TPS Signaling

• Static/dynamic delay insertion

• Integrated agile RF up-converter

• 1x RF L band output

• Remote control

• 10/100bT ethernet interface

• Embedded TCP/IP server

• Control & Command client software

• Compact equipment

• Robust and Portable

• 19'' 1RU rack mountable

• Alarm management