| |
Cost Effective, Turnkey, Real Time, MPEG-4 Over IP, Broadcast Resolution
Transmission System for Delivering High Quality SDI or Analog Content
to Distant Locations Such as Cable Television Headends via TCP/IP,
High Speed DSL, Wireless, or other IP Connections.
We believe the DVEO MPEG-4 Shuttle/IP™ leads the industry
in its ability to instantly deliver your content to distant locations
at affordable rates over affordable DSL and T1 circuits. It is designed
with the latest industry standard ASIC based MPEG-4 encoder technology
that is available commercially – with the latest version of
the Pro-MPEG Forum’s standard, Code of Practice (COP) 3 release
2 with Forward Error Correction (FEC) for reliable and interoperable
video transport.
As an encoder, the MPEG-4 Shuttle/IP digitizes SDI digital or composite
analog video signals, along with stereo audio, compresses them using
MPEG-2 (MP@ML) or MPEG-4 (SP@L1, L2 & L3, Full D1 & interlacing)
4:2:0 and MPEG-1 Layer-II audio compressions, multiplexes the video
and audio streams, and produces a DVB-compliant MPEG-2 Transport
Stream. It can accommodate both PAL and NTSC video formats. As a
decoder, it will accept any Pro-MPEG, RTP/IP, or UDP/IP encapsulated
MPEG-2 video transport stream, and decode video through its digital
SDI and analog composite video outputs. It encapsulates the video
transport stream into IP packets using the UDP or Real Time Protocol
(RTP) for complete interoperability with Set-Top Boxes (STB) and
other UDP and RTP compliant gateways.
We made these as close to appliances as we can make them today –
simple to setup and operate. They are designed to come up to known
state after a power failure and will recover elegantly when the
signal is removed and restored. We do not offer many settings, having
optimized for the cable industry. We believe we have a winning combination
of price and performance.
|
|
Standard Features
|
|
- MPEG-4 over IP – Sends and receives video simultaneously
- MPEG Encoding up to 9 Mbps
- Pro-MPEG COP 3 Release 2 FEC maintains video transport
quality
- Standalone preconfigured appliances requiring no setup
at all
- Sold as pairs for a complete video/IP end-to-end solution
- Provides same image quality at MPEG-4 at 2 Mbps as MPEG-2
at 4 Mbps
- Complete end to end solution -- Real time video in and
video out
- All you supply is the T1/E1/DSL or dedicated Internet
line with guaranteed bandwidth, and video
- Designed for 24x7 operation -- setup and forget!
- Optimized for T1 rates if content is uncompressed previously
- For previously compressed material, encode bit rate needs
to be increased by 50%-100%
- Video input and output: SDI, composite, or IP (UDP/RTP)
- Audio input and output is SMPTE 272M-ABC SDI-embedded
AES audio, or analog
- Note: picture artifacts depends on bandwidth available
and motion in pictures
- Standard T1/E/DSL 1 line requirements
|
|
Applications
|
- Studio to Transmitter (STL)
- Studio to studio
- Headend to Headend
- Teleport to Headend
- Headend to Teleport
- Traffic Cam
- Sports venue infrastructure
|
|
Main Competition
|
|
| Reason For Existence |
- Save The Operator Big $$$$...
|
| SPECIFICATIONS for
TX/RX unit: |
| Standard
Features |
|
- MPEG-4 over IP – Sends and
receives video simultaneously
- MPEG Encoding up to 9 Mbps
- Pro-MPEG COP 3 Release 2 FEC
maintains video transport quality
- Standalone preconfigured appliances requiring
no setup at all
- Sold as pairs for a complete
video/IP end-to-end solution
- Provides same image quality
at MPEG-4 at 2 Mbps as MPEG-2 at 4 Mbps
- Complete end to end solution
-- Real time video in and video out
- All you supply is the T1/E1/DSL
or dedicated Internet line with guaranteed bandwidth,
and video
- Designed for 24x7 operation
-- setup and forget!
- Optimized for T1 rates if
content is uncompressed previously
- For previously compressed
material, encode bit rate needs to be increased
by 50%-100%
- Video input and output: SDI,
composite, or IP (UDP/RTP)
- Audio input and output is
SMPTE 272M-ABC SDI-embedded AES audio, or analog
- Note: picture artifacts depends
on bandwidth available and motion in pictures
- Standard T1/E/DSL 1 line requirements
|
| Applications
|
- Studio to Transmitter (STL)
- Studio to studio
- Headend to Headend
- Teleport to Headend
- Headend to Teleport
- Traffic Cam
- Sports venue infrastructure
|
| Main
Competition |
|
| Reason For
Existence |
- Save The Operator Big $$$$...
|
| SPECIFICATIONS
for TX/RX unit: |
|
|
Network
Interface: |
|
1
IEEE 802.3 100/10 Base-TX Ethernet (RJ-45)
|
|
IP Network Stream Conditioning
& Error Correction (FEC): |
|
Packet
pacing
Pro-MPEG
Forum COP #3 Release 2 FEC
FEC
packet linearization as per Pro-MPEG Forum
COP #3.2, Annex A
4-20
Rows x 4-25 Columns FEC Matrix
|
|
Network Protocols: |
|
IP
Encapsulation: RTP/UDP/IP and UDP/IP
IETF
DiffServ and IEEE TOS compliance
IGMP
v.2 Multicast, SNMP v.2 traps
DHCP
|
|
Audio/Video Interfaces: |
|
One
SMPTE 259M SDI video input (BNC connector)
One SMPTE 259M SDI video output (BNC connector)
SMPTE 272M-ABC SDI-embedded 2-ch AES audio
One Composite video input (BNC connector)
Two Unbalanced audio inputs (RCA connectors)
One Composite video output (BNC connector)
Two Unbalanced audio outputs (RCA connectors
|
|
Transport
Stream Bit Rate (Audio & Video): |
|
400
Kbps to 9.0 Mbps (encode or decode no EC)
400 Kbps to 7.5 Mbps (encode or decode with
EC)
400 Kbps to 4.5 Mbps (bi-directional no
EC)
400 Kbps to 3.0 Mbps (bi-directional with
EC)
|
|
Audio: |
|
MPEG-1
Layer-II audio encoding, ISO/IEC-11172-3
Layer 2 standards compliant
Stereo
bit rates: 64K, 128K, 192K, 256K & 384
Kbps
SDI
embedded audio at 48 K samples/sec, 20 &
24-bit
Input
audio signal levels up to -1 dBu (0.976
Vpeak)
|
|
Video |
|
4:2:0
MPEG-2 MP@ML encoding: ISO/IEC-13818-2 standards
compliant
4:2:0
MPEG-4 Simple Profile @ L1, L2, & L3
with extensions for D1 and interlacing
NTSC:
720x480, 704x480, 640x480, 480x480, 352x480,
352x240, 320x240
PAL:
720x576, 704x576, 352x288
SDI:
720x480, 720x576
De-multiplex: MPEG-2 Transport & Program Streams
Encode
Line 21 Closed Captioning (Teletext optional)
|
|
Serial
Interfaces: |
|
DB-9
RS-232 Interface: remote camera control
over IP
USB
Port for future expansion (storage, networking)
|
|
Configuration
and Monitoring: |
|
Web
setup & monitoring interface over IP
network
SNMP
v1 & v2c traps
|
|
Electrical: |
|
AC
Power Input: 100-240Vac 50/60Hz, 30VA
Auto
sensing AC power adapter included
|
|
Mechanical: |
|
Dimensions: 8.25” (W) x 6.5” (D) x 1.75” (H)
Dimensions (mm): 208 (W) x 165 (D) x 44 (H)
Unit
Weight: 2.25 lbs (1.0 Kg)
Rack
mount bracket
|
|
Environmental: |
|
Operating
temperature: 0 to 50 o C o
Operating
humidity: 0 to 90% non-condensing relative
humidity
Non-operating temperature: -20 to 70 o C
Non-operating humidity: 0 to 95% non-condensing
relative humidity
|
|
Regulatory: |
|
RoHS,
CE and FCC compliant
|
|
|
|
|
中文 
English
