DVB-T+H, FLO (Mobile TV): Transport Stream Receiver Systems (QAM, QPSK, 8VSB, DVB-T IRDs)

Home >> DVB-T+H, FLO (Mobile TV) >> Professional Grade IRD's and/or Receivers and/or Demodulators with SDI HDSDI and ASI Out

Professional Self Powered Clear Channel QAM and DVB-C RF and Transport Stream Analysis Tool for Analyzing, Storing, and Viewing QAM and DVB-C Modulated (RF) MPEG-2 transport streams using any PC with a USB-2 interface. Comes set up for North American Clear Channel QAM (Annex B) and DVB-C. Equipped with loop through RF connectors feeding internal tuner. Ideal for field or head end RF analysis ETR 290 TS analysis and capture of faulty QAM signals onto a laptop and determination of parameters like missing constellations, MER, EVM, or missing PIDs along with typical MPEG-2 TS bouquet parsing. Also will continuously forward selected Transport Streams to your head end via built in IP encapsulator of the associated laptop's IP port. This can be a long term data logger...

Broadcast Quality, Frequency Agile 8VSB HDTV Receiver Demodulator with on board HD MPEG-2 TS Decoder with RF, 8VSB (ATSC) or DVB ASI TS input and MP @ HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB output. Dolby AC-3 and MPEG Audio decode with XLR connectors. Ideal receiver for Signal Repurposing or monitoring.

Professional Grade, 19 inch Rack Mountable, and Cost Effective IRD with QPSK and ASI inputs. Decodes up to 40 Mbps streams. PID and channel selection via Front Panel LCD. Composite NTSC and PAL outputs. MPEG audio outputs via RCA or XLR. Includes slot for CAM module. Outputs Composite, Y/C, or ASI.

Standard Features:

• Includes Control and Analysis Software
• Cable RF Front End (QAM Annex A, B, C Capable)
• RF Analysis and Lock on a Digital Cable Channel
• DiviCatch real-time TS Capturing features -- scheduled recording capacity, multi-files/circular recording, and TS packets timestamping
• Real time MPEG-2 TS Analyzer
• Support for HD and SD streams
• TS over IP streamer -- TS over UDP, Unicast or Multicast
• Command Line Package for Automated Testing
• Robust metallic housing, USB self-powered
• Pocket sized -- 5.3" x 2.42" x 1.06" deep (134.7 mm x 61.45 mm x 27 mm deep)
  

Applications:

• Digital Cable broadcast test and monitoring
• RF reception quality measurement
• Ideally suited to field testing
  

Standard Features:

• Signal from 75 ohm F-connector
• May choose digital stream from on-air terrestrial ATSC and SMPTE-310M signal
• Selected digital stream is supplied in SMPTE-310M format signal
• MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-292M (HD-SDI) with embedded 6 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over XLR connector
• Dolby Pro Logic compatible stereo audio output on two XLR connector
• RGB video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL video output available on 480i video mode
• 2 lines by 40 characters LCD display
• PSIP / EIA-608 closed caption compliant
• 1U rack mountable frame

Standard Features:

• DVB and MPEG-2 Compliant
• Dual Common Interface Slot for PCMCIA
• Conax, CryptoWorks, Irdeto, NDS, Mediaguard, SECA, Viaccess and Others Supported
• Decodes to 15 Mbps
• Remote Control Switching
• Transparent Decryption ASI or Non-Decryption Output
• Dual QPSK & ASI Input Options
• Multiple Channel Decryption via a IRDio Daisy-Chain Configuration
• Front Panel Configuration and Monitoring
• 256 Color Screen Display Supports Multiple Languages
• OSD Teletext (DVB ETS 300 706) and Closed Caption Function Supported
• Video PID & Audio PID Setup EPG
• Function Supports PID Display
• Automatic Conversion Between NTSC & PAL
• Software Upgradeable via RS-232
• 2000 Channel Storage
• Universal Power Supply
• BISS support
  
  

Little known facts about Iridium: The element

Broadcast Quality, Frequency Agile, 8 and 16 VSB and QAM 64/256 (not Annex A) HDTV Receiver/Demodulator with on board HD MPEG-2 TS Decoder with 8 VSB ATSC or TS input and ASI, ATSC, SPI, SDI, HD-SDI, Y/C, or Y Pr Pb output. Dolby AC-3 and MPEG Audio decode with XLR connectors. Ideal receiver for Signal Repurposing or monitoring.

Very High Performance 2RU MPEG-2 or H.264 IP Video Server with Very High Performance intelligent "Custom" dual channel 10 Gbps IP Accelerators, Proprietary Real Time "minimal OS", and a Proprietary "Interleaved Memory Array" based caching algorithm all designed to serve many thousands of Standard or High Definition Streams simultaneously to many thousand of clients. Solid State Disk Storage Arrays provide the reliability and maintainability that is crucial in these high performance deployments. This architecture will scale linearly and a Rack of MegaServers can serve 160,000 clients at the same time. Truly Amazing! This server must reside on the Internet Backbone at or near an "Network Access Point" since it will consume considerable backbone bandwidth . This is not for use by mere mortals!! Ideal for use by telcos and others who are architecting "the future" with IPTV.

Single and dual channel Professional MPEG-2 Standard Def DVB and ATSC receivers and integrated decoders with QPSK RF and IP in and ASI, SDI, or Composite out with Dolby Digital Support

Standard Features:

• Accepts 8/16 VSB and 64/256 QAM signal via 75 ohm F-connector
• Demodulates Off Air Channels 2-69 and Cable channels 2-125
• May choose input digital stream from on-air terrestrial, or SMPTE-310M, DVB-ASI and LVDS signal
• Output signal is available in SMPTE-310M, DVB-ASI and LVDS or several uncompressed formats
• MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-292M (HD-SDI) with embedded 6 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• AC-3 or PCM stereo audio selectable over AES3 XLR connector
• Dolby Pro Logic compatible stereo audio on two XLR connectors
• RGB/YPbPr video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL and S-video output available on 480i video mode
• 4 lines by 20 characters fluorescent display
• Outputs PSIP table info and constellation diagram
• PSIP/EIA-608 Closed Caption compliant with CC on video out
• 2U rack mountable frame
  
  

Data Sheet available by request only:

Standard Features:

• The UID-2902 Universal IP Decoder is designed to provide a cost effective solution for the migration from current analog distribution networks to IP distribution networks.
• Built to save rack space and power, the UID-2902 concurrently decodes two video programs from the incoming transport stream and provides professional video and audio quality.
• Dual MPEG over IP inputs allow the UID-2902 to provide a high level of availability by supporting both link redundancy and logical (source) redundancy resuming normal operation in a split of a second.
• Remotely managing and controlling the UID-2902 is easily done either by using SNMP or by using the powerful yet easy to use Web based management.
  
  
  

Broadcast Quality, Frequency Agile 8VSB HDTV Receiver Demodulator with on board HD MPEG-2 TS Decoder with RF, 8VSB (ATSC) or DVB ASI TS input and MP @ HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB output. Dolby AC-3 and MPEG Audio decode with terminal block connectors. Ideal receiver for Signal Repurposing or monitoring.

Standard Features:

• Accepts 8VSB signal via 75 ohm F-connector
• May choose digital stream from on-air terrestrial and ATSC signal
• Selected digital stream is supplied in SMPTE-310M format signal
• MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
• Digital video signal compliant with SMPTE-292M (HD-SDI) with embedded 6 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Pro Logic compatible stereo audio output on two terminal block connectors
• RGB video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL video output available
• 2 lines by 40 characters LCD display
• PSIP / EIA-608 closed caption compliant
• 54-864 Mhz frequency range
• 1U rack mountable frame
  

SNMP Reference Manual & MIB (Zip file)